安裝 MariaDB 10.3 版
1 安裝 MariaDB 10.3 套件
在 Rocky Linux 8 安裝 MariaDB 10.3 相對簡單，而且 10.3 是比較穩定的版本，故目前仍建議使用預設的版本，安裝指令如下所示，這個版本的 MariaDB 相依了非常多的套件。
$ sudo yum install mariadb mariadb-server -y
[sudo] kevin 的密碼：
上次中介資料過期檢查：1:23:23 前，時間點為西元2022年05月31日 (週二) 15時17分06秒。
依賴關係解析完畢。
==============================================================================================================================================================================================================
軟體包 架構 版本 軟體庫 大小
==============================================================================================================================================================================================================
安裝:
mariadb x86_64 3:10.3.32-2.module+el8.5.0+777+18007c86 appstream 6.0 M
mariadb-server x86_64 3:10.3.32-2.module+el8.5.0+777+18007c86 appstream 16 M
將安裝依賴項目:
mariadb-common x86_64 3:10.3.32-2.module+el8.5.0+777+18007c86 appstream 63 k
mariadb-connector-c x86_64 3.1.11-2.el8_3 appstream 199 k
mariadb-connector-c-config noarch 3.1.11-2.el8_3 appstream 14 k
mariadb-errmsg x86_64 3:10.3.32-2.module+el8.5.0+777+18007c86 appstream 233 k
perl-Carp noarch 1.42-396.el8 baseos 29 k
perl-DBD-MySQL x86_64 4.046-3.module+el8.6.0+904+ef468285 appstream 155 k
perl-DBI x86_64 1.641-4.module+el8.6.0+891+677074cb appstream 739 k
perl-Data-Dumper x86_64 2.167-399.el8 baseos 57 k
perl-Digest noarch 1.17-395.el8 appstream 26 k
perl-Digest-MD5 x86_64 2.55-396.el8 appstream 36 k
perl-Encode x86_64 4:2.97-3.el8 baseos 1.5 M
perl-Errno x86_64 1.28-421.el8 baseos 75 k
perl-Exporter noarch 5.72-396.el8 baseos 33 k
perl-File-Path noarch 2.15-2.el8 baseos 37 k
perl-File-Temp noarch 0.230.600-1.el8 baseos 62 k
perl-Getopt-Long noarch 1:2.50-4.el8 baseos 62 k
perl-HTTP-Tiny noarch 0.074-1.el8 baseos 57 k
perl-IO x86_64 1.38-421.el8 baseos 141 k
perl-MIME-Base64 x86_64 3.15-396.el8 baseos 30 k
perl-Math-BigInt noarch 1:1.9998.11-7.el8 baseos 194 k
perl-Math-Complex noarch 1.59-421.el8 baseos 108 k
perl-Net-SSLeay x86_64 1.88-2.module+el8.6.0+957+15d660ad appstream 378 k
perl-PathTools x86_64 3.74-1.el8 baseos 89 k
perl-Pod-Escapes noarch 1:1.07-395.el8 baseos 19 k
perl-Pod-Perldoc noarch 3.28-396.el8 baseos 85 k
perl-Pod-Simple noarch 1:3.35-395.el8 baseos 212 k
perl-Pod-Usage noarch 4:1.69-395.el8 baseos 33 k
perl-Scalar-List-Utils x86_64 3:1.49-2.el8 baseos 67 k
perl-Socket x86_64 4:2.027-3.el8 baseos 58 k
perl-Storable x86_64 1:3.11-3.el8 baseos 97 k
perl-Term-ANSIColor noarch 4.06-396.el8 baseos 45 k
perl-Term-Cap noarch 1.17-395.el8 baseos 22 k
perl-Text-ParseWords noarch 3.30-395.el8 baseos 17 k
perl-Text-Tabs+Wrap noarch 2013.0523-395.el8 baseos 23 k
perl-Time-Local noarch 1:1.280-1.el8 baseos 32 k
perl-URI noarch 1.73-3.el8 appstream 115 k
perl-Unicode-Normalize x86_64 1.25-396.el8 baseos 81 k
perl-constant noarch 1.33-396.el8 baseos 24 k
perl-interpreter x86_64 4:5.26.3-421.el8 baseos 6.3 M
perl-libnet noarch 3.11-3.el8 appstream 120 k
perl-libs x86_64 4:5.26.3-421.el8 baseos 1.6 M
perl-macros x86_64 4:5.26.3-421.el8 baseos 71 k
perl-parent noarch 1:0.237-1.el8 baseos 19 k
perl-podlators noarch 4.11-1.el8 baseos 117 k
perl-threads x86_64 1:2.21-2.el8 baseos 60 k
perl-threads-shared x86_64 1.58-2.el8 baseos 47 k
將安裝弱依賴項目:
mariadb-backup x86_64 3:10.3.32-2.module+el8.5.0+777+18007c86 appstream 6.1 M
mariadb-gssapi-server x86_64 3:10.3.32-2.module+el8.5.0+777+18007c86 appstream 50 k
mariadb-server-utils x86_64 3:10.3.32-2.module+el8.5.0+777+18007c86 appstream 1.1 M
perl-IO-Socket-IP noarch 0.39-5.el8 appstream 46 k
perl-IO-Socket-SSL noarch 2.066-4.module+el8.6.0+957+15d660ad appstream 297 k
perl-Mozilla-CA noarch 20160104-7.module+el8.6.0+965+850557f9 appstream 14 k
正在啟用模組串流:
mariadb 10.3
perl 5.26
perl-DBD-MySQL 4.046
perl-DBI 1.641
perl-IO-Socket-SSL 2.066
perl-libwww-perl 6.34
處理事項摘要
==============================================================================================================================================================================================================
安裝 54 軟體包
總下載大小：43 M
安裝的大小：191 M
下載軟體包：
(1/54): mariadb-common-10.3.32-2.module+el8.5.0+777+18007c86.x86_64.rpm 157 kB/s | 63 kB 00:00
(2/54): mariadb-connector-c-3.1.11-2.el8_3.x86_64.rpm 579 kB/s | 199 kB 00:00
(3/54): mariadb-connector-c-config-3.1.11-2.el8_3.noarch.rpm 115 kB/s | 14 kB 00:00
(4/54): mariadb-errmsg-10.3.32-2.module+el8.5.0+777+18007c86.x86_64.rpm 775 kB/s | 233 kB 00:00
(5/54): mariadb-gssapi-server-10.3.32-2.module+el8.5.0+777+18007c86.x86_64.rpm 483 kB/s | 50 kB 00:00
(6/54): mariadb-backup-10.3.32-2.module+el8.5.0+777+18007c86.x86_64.rpm 3.1 MB/s | 6.1 MB 00:01
(7/54): mariadb-server-utils-10.3.32-2.module+el8.5.0+777+18007c86.x86_64.rpm 1.4 MB/s | 1.1 MB 00:00
(8/54): perl-DBD-MySQL-4.046-3.module+el8.6.0+904+ef468285.x86_64.rpm 491 kB/s | 155 kB 00:00
(9/54): mariadb-10.3.32-2.module+el8.5.0+777+18007c86.x86_64.rpm 1.7 MB/s | 6.0 MB 00:03
(10/54): perl-Digest-1.17-395.el8.noarch.rpm 246 kB/s | 26 kB 00:00
(11/54): perl-Digest-MD5-2.55-396.el8.x86_64.rpm 368 kB/s | 36 kB 00:00
(12/54): perl-DBI-1.641-4.module+el8.6.0+891+677074cb.x86_64.rpm 1.0 MB/s | 739 kB 00:00
(13/54): perl-IO-Socket-IP-0.39-5.el8.noarch.rpm 337 kB/s | 46 kB 00:00
(14/54): perl-Mozilla-CA-20160104-7.module+el8.6.0+965+850557f9.noarch.rpm 144 kB/s | 14 kB 00:00
(15/54): perl-IO-Socket-SSL-2.066-4.module+el8.6.0+957+15d660ad.noarch.rpm 988 kB/s | 297 kB 00:00
(16/54): perl-URI-1.73-3.el8.noarch.rpm 973 kB/s | 115 kB 00:00
(17/54): perl-Net-SSLeay-1.88-2.module+el8.6.0+957+15d660ad.x86_64.rpm 1.2 MB/s | 378 kB 00:00
(18/54): perl-libnet-3.11-3.el8.noarch.rpm 1.0 MB/s | 120 kB 00:00
(19/54): perl-Carp-1.42-396.el8.noarch.rpm 138 kB/s | 29 kB 00:00
(20/54): perl-Data-Dumper-2.167-399.el8.x86_64.rpm 255 kB/s | 57 kB 00:00
(21/54): perl-Errno-1.28-421.el8.x86_64.rpm 683 kB/s | 75 kB 00:00
(22/54): perl-Exporter-5.72-396.el8.noarch.rpm 688 kB/s | 33 kB 00:00
(23/54): perl-File-Path-2.15-2.el8.noarch.rpm 418 kB/s | 37 kB 00:00
(24/54): perl-Encode-2.97-3.el8.x86_64.rpm 3.4 MB/s | 1.5 MB 00:00
(25/54): perl-File-Temp-0.230.600-1.el8.noarch.rpm 767 kB/s | 62 kB 00:00
(26/54): perl-Getopt-Long-2.50-4.el8.noarch.rpm 1.5 MB/s | 62 kB 00:00
(27/54): perl-HTTP-Tiny-0.074-1.el8.noarch.rpm 1.3 MB/s | 57 kB 00:00
(28/54): perl-IO-1.38-421.el8.x86_64.rpm 2.5 MB/s | 141 kB 00:00
(29/54): perl-Math-BigInt-1.9998.11-7.el8.noarch.rpm 2.2 MB/s | 194 kB 00:00
(30/54): perl-Math-Complex-1.59-421.el8.noarch.rpm 1.4 MB/s | 108 kB 00:00
(31/54): perl-MIME-Base64-3.15-396.el8.x86_64.rpm 140 kB/s | 30 kB 00:00
(32/54): perl-PathTools-3.74-1.el8.x86_64.rpm 1.7 MB/s | 89 kB 00:00
(33/54): perl-Pod-Escapes-1.07-395.el8.noarch.rpm 383 kB/s | 19 kB 00:00
(34/54): perl-Pod-Perldoc-3.28-396.el8.noarch.rpm 1.6 MB/s | 85 kB 00:00
(35/54): perl-Pod-Usage-1.69-395.el8.noarch.rpm 582 kB/s | 33 kB 00:00
(36/54): perl-Pod-Simple-3.35-395.el8.noarch.rpm 1.2 MB/s | 212 kB 00:00
(37/54): perl-Socket-2.027-3.el8.x86_64.rpm 1.2 MB/s | 58 kB 00:00
(38/54): perl-Storable-3.11-3.el8.x86_64.rpm 1.1 MB/s | 97 kB 00:00
(39/54): perl-Scalar-List-Utils-1.49-2.el8.x86_64.rpm 295 kB/s | 67 kB 00:00
(40/54): perl-Term-ANSIColor-4.06-396.el8.noarch.rpm 1.0 MB/s | 45 kB 00:00
(41/54): perl-Term-Cap-1.17-395.el8.noarch.rpm 550 kB/s | 22 kB 00:00
(42/54): perl-Text-ParseWords-3.30-395.el8.noarch.rpm 278 kB/s | 17 kB 00:00
(43/54): perl-Text-Tabs+Wrap-2013.0523-395.el8.noarch.rpm 452 kB/s | 23 kB 00:00
(44/54): perl-Time-Local-1.280-1.el8.noarch.rpm 754 kB/s | 32 kB 00:00
(45/54): perl-Unicode-Normalize-1.25-396.el8.x86_64.rpm 1.5 MB/s | 81 kB 00:00
(46/54): perl-constant-1.33-396.el8.noarch.rpm 591 kB/s | 24 kB 00:00
(47/54): perl-libs-5.26.3-421.el8.x86_64.rpm 2.6 MB/s | 1.6 MB 00:00
(48/54): perl-macros-5.26.3-421.el8.x86_64.rpm 968 kB/s | 71 kB 00:00
(49/54): perl-parent-0.237-1.el8.noarch.rpm 423 kB/s | 19 kB 00:00
(50/54): perl-podlators-4.11-1.el8.noarch.rpm 2.0 MB/s | 117 kB 00:00
(51/54): perl-threads-2.21-2.el8.x86_64.rpm 1.4 MB/s | 60 kB 00:00
(52/54): perl-threads-shared-1.58-2.el8.x86_64.rpm 1.0 MB/s | 47 kB 00:00
(53/54): perl-interpreter-5.26.3-421.el8.x86_64.rpm 4.2 MB/s | 6.3 MB 00:01
(54/54): mariadb-server-10.3.32-2.module+el8.5.0+777+18007c86.x86_64.rpm 1.5 MB/s | 16 MB 00:11
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
總計 3.2 MB/s | 43 MB 00:13
執行處理事項檢查
處理事項檢查成功。
執行處理事項測試
處理事項測試成功。
執行處理事項
準備 : 1/1
正在安裝 : mariadb-connector-c-config-3.1.11-2.el8_3.noarch 1/54
正在安裝 : mariadb-common-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 2/54
正在安裝 : mariadb-errmsg-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 3/54
正在安裝 : perl-Digest-1.17-395.el8.noarch 4/54
正在安裝 : perl-Digest-MD5-2.55-396.el8.x86_64 5/54
正在安裝 : perl-Data-Dumper-2.167-399.el8.x86_64 6/54
正在安裝 : perl-libnet-3.11-3.el8.noarch 7/54
正在安裝 : perl-Net-SSLeay-1.88-2.module+el8.6.0+957+15d660ad.x86_64 8/54
正在安裝 : perl-URI-1.73-3.el8.noarch 9/54
正在安裝 : perl-Pod-Escapes-1:1.07-395.el8.noarch 10/54
正在安裝 : perl-Mozilla-CA-20160104-7.module+el8.6.0+965+850557f9.noarch 11/54
正在安裝 : perl-IO-Socket-IP-0.39-5.el8.noarch 12/54
正在安裝 : perl-Time-Local-1:1.280-1.el8.noarch 13/54
正在安裝 : perl-IO-Socket-SSL-2.066-4.module+el8.6.0+957+15d660ad.noarch 14/54
正在安裝 : perl-Term-ANSIColor-4.06-396.el8.noarch 15/54
正在安裝 : perl-Term-Cap-1.17-395.el8.noarch 16/54
正在安裝 : perl-File-Temp-0.230.600-1.el8.noarch 17/54
正在安裝 : perl-Pod-Simple-1:3.35-395.el8.noarch 18/54
正在安裝 : perl-HTTP-Tiny-0.074-1.el8.noarch 19/54
正在安裝 : perl-podlators-4.11-1.el8.noarch 20/54
正在安裝 : perl-Pod-Perldoc-3.28-396.el8.noarch 21/54
正在安裝 : perl-Text-ParseWords-3.30-395.el8.noarch 22/54
正在安裝 : perl-Pod-Usage-4:1.69-395.el8.noarch 23/54
正在安裝 : perl-MIME-Base64-3.15-396.el8.x86_64 24/54
正在安裝 : perl-Storable-1:3.11-3.el8.x86_64 25/54
正在安裝 : perl-Getopt-Long-1:2.50-4.el8.noarch 26/54
正在安裝 : perl-Errno-1.28-421.el8.x86_64 27/54
正在安裝 : perl-Socket-4:2.027-3.el8.x86_64 28/54
正在安裝 : perl-Encode-4:2.97-3.el8.x86_64 29/54
正在安裝 : perl-Carp-1.42-396.el8.noarch 30/54
正在安裝 : perl-Exporter-5.72-396.el8.noarch 31/54
正在安裝 : perl-libs-4:5.26.3-421.el8.x86_64 32/54
正在安裝 : perl-Scalar-List-Utils-3:1.49-2.el8.x86_64 33/54
正在安裝 : perl-parent-1:0.237-1.el8.noarch 34/54
正在安裝 : perl-macros-4:5.26.3-421.el8.x86_64 35/54
正在安裝 : perl-Text-Tabs+Wrap-2013.0523-395.el8.noarch 36/54
正在安裝 : perl-Unicode-Normalize-1.25-396.el8.x86_64 37/54
正在安裝 : perl-File-Path-2.15-2.el8.noarch 38/54
正在安裝 : perl-IO-1.38-421.el8.x86_64 39/54
正在安裝 : perl-PathTools-3.74-1.el8.x86_64 40/54
正在安裝 : perl-constant-1.33-396.el8.noarch 41/54
正在安裝 : perl-threads-1:2.21-2.el8.x86_64 42/54
正在安裝 : perl-threads-shared-1.58-2.el8.x86_64 43/54
正在安裝 : perl-interpreter-4:5.26.3-421.el8.x86_64 44/54
正在安裝 : perl-Math-Complex-1.59-421.el8.noarch 45/54
正在安裝 : perl-Math-BigInt-1:1.9998.11-7.el8.noarch 46/54
正在安裝 : perl-DBI-1.641-4.module+el8.6.0+891+677074cb.x86_64 47/54
正在安裝 : perl-DBD-MySQL-4.046-3.module+el8.6.0+904+ef468285.x86_64 48/54
正在安裝 : mariadb-connector-c-3.1.11-2.el8_3.x86_64 49/54
正在安裝 : mariadb-backup-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 50/54
正在安裝 : mariadb-gssapi-server-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 51/54
正在安裝 : mariadb-server-utils-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 52/54
執行小令稿 : mariadb-server-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 53/54
正在安裝 : mariadb-server-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 53/54
執行小令稿 : mariadb-server-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 53/54
正在安裝 : mariadb-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 54/54
執行小令稿 : mariadb-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 54/54
核驗 : mariadb-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 1/54
核驗 : mariadb-backup-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 2/54
核驗 : mariadb-common-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 3/54
核驗 : mariadb-connector-c-3.1.11-2.el8_3.x86_64 4/54
核驗 : mariadb-connector-c-config-3.1.11-2.el8_3.noarch 5/54
核驗 : mariadb-errmsg-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 6/54
核驗 : mariadb-gssapi-server-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 7/54
核驗 : mariadb-server-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 8/54
核驗 : mariadb-server-utils-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 9/54
核驗 : perl-DBD-MySQL-4.046-3.module+el8.6.0+904+ef468285.x86_64 10/54
核驗 : perl-DBI-1.641-4.module+el8.6.0+891+677074cb.x86_64 11/54
核驗 : perl-Digest-1.17-395.el8.noarch 12/54
核驗 : perl-Digest-MD5-2.55-396.el8.x86_64 13/54
核驗 : perl-IO-Socket-IP-0.39-5.el8.noarch 14/54
核驗 : perl-IO-Socket-SSL-2.066-4.module+el8.6.0+957+15d660ad.noarch 15/54
核驗 : perl-Mozilla-CA-20160104-7.module+el8.6.0+965+850557f9.noarch 16/54
核驗 : perl-Net-SSLeay-1.88-2.module+el8.6.0+957+15d660ad.x86_64 17/54
核驗 : perl-URI-1.73-3.el8.noarch 18/54
核驗 : perl-libnet-3.11-3.el8.noarch 19/54
核驗 : perl-Carp-1.42-396.el8.noarch 20/54
核驗 : perl-Data-Dumper-2.167-399.el8.x86_64 21/54
核驗 : perl-Encode-4:2.97-3.el8.x86_64 22/54
核驗 : perl-Errno-1.28-421.el8.x86_64 23/54
核驗 : perl-Exporter-5.72-396.el8.noarch 24/54
核驗 : perl-File-Path-2.15-2.el8.noarch 25/54
核驗 : perl-File-Temp-0.230.600-1.el8.noarch 26/54
核驗 : perl-Getopt-Long-1:2.50-4.el8.noarch 27/54
核驗 : perl-HTTP-Tiny-0.074-1.el8.noarch 28/54
核驗 : perl-IO-1.38-421.el8.x86_64 29/54
核驗 : perl-MIME-Base64-3.15-396.el8.x86_64 30/54
核驗 : perl-Math-BigInt-1:1.9998.11-7.el8.noarch 31/54
核驗 : perl-Math-Complex-1.59-421.el8.noarch 32/54
核驗 : perl-PathTools-3.74-1.el8.x86_64 33/54
核驗 : perl-Pod-Escapes-1:1.07-395.el8.noarch 34/54
核驗 : perl-Pod-Perldoc-3.28-396.el8.noarch 35/54
核驗 : perl-Pod-Simple-1:3.35-395.el8.noarch 36/54
核驗 : perl-Pod-Usage-4:1.69-395.el8.noarch 37/54
核驗 : perl-Scalar-List-Utils-3:1.49-2.el8.x86_64 38/54
核驗 : perl-Socket-4:2.027-3.el8.x86_64 39/54
核驗 : perl-Storable-1:3.11-3.el8.x86_64 40/54
核驗 : perl-Term-ANSIColor-4.06-396.el8.noarch 41/54
核驗 : perl-Term-Cap-1.17-395.el8.noarch 42/54
核驗 : perl-Text-ParseWords-3.30-395.el8.noarch 43/54
核驗 : perl-Text-Tabs+Wrap-2013.0523-395.el8.noarch 44/54
核驗 : perl-Time-Local-1:1.280-1.el8.noarch 45/54
核驗 : perl-Unicode-Normalize-1.25-396.el8.x86_64 46/54
核驗 : perl-constant-1.33-396.el8.noarch 47/54
核驗 : perl-interpreter-4:5.26.3-421.el8.x86_64 48/54
核驗 : perl-libs-4:5.26.3-421.el8.x86_64 49/54
核驗 : perl-macros-4:5.26.3-421.el8.x86_64 50/54
核驗 : perl-parent-1:0.237-1.el8.noarch 51/54
核驗 : perl-podlators-4.11-1.el8.noarch 52/54
核驗 : perl-threads-1:2.21-2.el8.x86_64 53/54
核驗 : perl-threads-shared-1.58-2.el8.x86_64 54/54
已安裝:
mariadb-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 mariadb-backup-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 mariadb-common-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64
mariadb-connector-c-3.1.11-2.el8_3.x86_64 mariadb-connector-c-config-3.1.11-2.el8_3.noarch mariadb-errmsg-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64
mariadb-gssapi-server-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 mariadb-server-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64 mariadb-server-utils-3:10.3.32-2.module+el8.5.0+777+18007c86.x86_64
perl-Carp-1.42-396.el8.noarch perl-DBD-MySQL-4.046-3.module+el8.6.0+904+ef468285.x86_64 perl-DBI-1.641-4.module+el8.6.0+891+677074cb.x86_64
perl-Data-Dumper-2.167-399.el8.x86_64 perl-Digest-1.17-395.el8.noarch perl-Digest-MD5-2.55-396.el8.x86_64
perl-Encode-4:2.97-3.el8.x86_64 perl-Errno-1.28-421.el8.x86_64 perl-Exporter-5.72-396.el8.noarch
perl-File-Path-2.15-2.el8.noarch perl-File-Temp-0.230.600-1.el8.noarch perl-Getopt-Long-1:2.50-4.el8.noarch
perl-HTTP-Tiny-0.074-1.el8.noarch perl-IO-1.38-421.el8.x86_64 perl-IO-Socket-IP-0.39-5.el8.noarch
perl-IO-Socket-SSL-2.066-4.module+el8.6.0+957+15d660ad.noarch perl-MIME-Base64-3.15-396.el8.x86_64 perl-Math-BigInt-1:1.9998.11-7.el8.noarch
perl-Math-Complex-1.59-421.el8.noarch perl-Mozilla-CA-20160104-7.module+el8.6.0+965+850557f9.noarch perl-Net-SSLeay-1.88-2.module+el8.6.0+957+15d660ad.x86_64
perl-PathTools-3.74-1.el8.x86_64 perl-Pod-Escapes-1:1.07-395.el8.noarch perl-Pod-Perldoc-3.28-396.el8.noarch
perl-Pod-Simple-1:3.35-395.el8.noarch perl-Pod-Usage-4:1.69-395.el8.noarch perl-Scalar-List-Utils-3:1.49-2.el8.x86_64
perl-Socket-4:2.027-3.el8.x86_64 perl-Storable-1:3.11-3.el8.x86_64 perl-Term-ANSIColor-4.06-396.el8.noarch
perl-Term-Cap-1.17-395.el8.noarch perl-Text-ParseWords-3.30-395.el8.noarch perl-Text-Tabs+Wrap-2013.0523-395.el8.noarch
perl-Time-Local-1:1.280-1.el8.noarch perl-URI-1.73-3.el8.noarch perl-Unicode-Normalize-1.25-396.el8.x86_64
perl-constant-1.33-396.el8.noarch perl-interpreter-4:5.26.3-421.el8.x86_64 perl-libnet-3.11-3.el8.noarch
perl-libs-4:5.26.3-421.el8.x86_64 perl-macros-4:5.26.3-421.el8.x86_64 perl-parent-1:0.237-1.el8.noarch
perl-podlators-4.11-1.el8.noarch perl-threads-1:2.21-2.el8.x86_64 perl-threads-shared-1.58-2.el8.x86_64
完成！2 啟用 MariaDB 伺服器的服務
啟用服務的指令如下：
$ sudo systemctl restart mariadb
$ sudo systemctl enable mariadb
Created symlink /etc/systemd/system/mysql.service → /usr/lib/systemd/system/mariadb.service.
Created symlink /etc/systemd/system/mysqld.service → /usr/lib/systemd/system/mariadb.service.
Created symlink /etc/systemd/system/multi-user.target.wants/mariadb.service → /usr/lib/systemd/system/mariadb.service.3 初始化 MariaDB 資料庫環境
初始化指令如下：
$ sudo mysql_secure_installation接下來會一直問各種問題，如下所示，詢問目前 root 用戶的密碼，因為一開始沒有設定，請直接按 Enter 鍵繼續。
NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB
SERVERS IN PRODUCTION USE! PLEASE READ EACH STEP CAREFULLY!
In order to log into MariaDB to secure it, we'll need the current
password for the root user. If you've just installed MariaDB, and
you haven't set the root password yet, the password will be blank,
so you should just press enter here.
Enter current password for root (enter for none):直接按 Enter 鍵要不要設定 root 密碼？按下 Y 並輸入二次密碼。
OK, successfully used password, moving on...
Setting the root password ensures that nobody can log into the MariaDB
root user without the proper authorisation.
Set root password? [Y/n] Y
New password:
Re-enter new password:
Password updated successfully!
Reloading privilege tables..
... Success!是否要移除 anonymous users 的密碼？按下 Y 繼續。
By default, a MariaDB installation has an anonymous user, allowing anyone
to log into MariaDB without having to have a user account created for
them. This is intended only for testing, and to make the installation
go a bit smoother. You should remove them before moving into a
production environment.
Remove anonymous users? [Y/n]Ｙ
... Success!是否要關閉 root 從遠端登入的權限？按下 Y 繼續。
Normally, root should only be allowed to connect from 'localhost'. This
ensures that someone cannot guess at the root password from the network.
Disallow root login remotely? [Y/n]Ｙ
... Success!是否要 Reload 權限？按下 Y 繼續。
By default, MariaDB comes with a database named 'test' that anyone can
access. This is also intended only for testing, and should be removed
before moving into a production environment.
Remove test database and access to it? [Y/n]Ｙ
- Dropping test database...
... Success!
- Removing privileges on test database...
... Success!是否要移除測試資料庫？按下 Y 繼續。
Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.
Reload privilege tables now? [Y/n] Y
... Success!
Cleaning up...
All done! If you've completed all of the above steps, your MariaDB
installation should now be secure.
Thanks for using MariaDB!完成 MariaDB 初始化設定工作。
4 設定 MariaDB 的預設字元集(UTF8mb4)
請在 /etc/my.conf.d/ 目錄中新增一個新的設定檔，指令如下：
sudo vim /etc/my.cnf.d/default-character.cnf內容如下：
[client]
default-character-set=utf8mb4 ## 修改 Client characterset 與 Conn. characterset
[mysqld]
character-set-server=utf8mb4 ## 修改 Server characterset 與 Db characterset
collation-server=utf8mb4_unicode_ci ## 會修改預設的校驗比對方法
5 重新啟動 MariaDB 服務
$ sudo systemctl restart mariadb6 確認 MariaDB 服務狀態
利用 netstat 指令確認服務是否有啟動(有發現 3306 port 運作中)。
$ sudo netstat -tlnp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 644/sshd
tcp6 0 0 :::3306 :::* LISTEN 9388/mysqld
tcp6 0 0 :::80 :::* LISTEN 5756/httpd
tcp6 0 0 :::22 :::* LISTEN 644/sshd
tcp6 0 0 :::443 :::* LISTEN 5756/httpd利用 systemctl 指令查看一下相關服務的啟用情況。
$ sudo systemctl status mariadb
● mariadb.service - MariaDB 10.3 database server
Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
Active: active (running) since Tue 2022-05-31 17:01:18 CST; 2min 0s ago
Docs: man:mysqld(8)
https://mariadb.com/kb/en/library/systemd/
Process: 9419 ExecStartPost=/usr/libexec/mysql-check-upgrade (code=exited, status=0/SUCCESS)
Process: 9349 ExecStartPre=/usr/libexec/mysql-prepare-db-dir mariadb.service (code=exited, status=0/SUCCESS)
Process: 9324 ExecStartPre=/usr/libexec/mysql-check-socket (code=exited, status=0/SUCCESS)
Main PID: 9388 (mysqld)
Status: "Taking your SQL requests now..."
Tasks: 30 (limit: 11374)
Memory: 73.4M
CGroup: /system.slice/mariadb.service
└─9388 /usr/libexec/mysqld --basedir=/usr
5月 31 17:01:18 rockylinux.ossii.com.tw systemd[1]: mariadb.service: Succeeded.
5月 31 17:01:18 rockylinux.ossii.com.tw systemd[1]: Stopped MariaDB 10.3 database server.
5月 31 17:01:18 rockylinux.ossii.com.tw systemd[1]: Starting MariaDB 10.3 database server...
5月 31 17:01:18 rockylinux.ossii.com.tw mysql-prepare-db-dir[9349]: Database MariaDB is probably initialized in /var/lib/mysql already, nothing is done.
5月 31 17:01:18 rockylinux.ossii.com.tw mysql-prepare-db-dir[9349]: If this is not the case, make sure the /var/lib/mysql is empty before running mysql-prepare-db-dir.
5月 31 17:01:18 rockylinux.ossii.com.tw mysqld[9388]: 2022-05-31 17:01:18 0 [Note] /usr/libexec/mysqld (mysqld 10.3.32-MariaDB) starting as process 9388 ...
5月 31 17:01:18 rockylinux.ossii.com.tw systemd[1]: Started MariaDB 10.3 database server.